BMC Teammachine R 01 Three: Red Bull Tech Aero Carbon Road Bike with SRAM Force AXS Power Meter & CRD-501 SL Wheels

The BMC Teammachine R 01 Three pairs the most aerodynamically advanced chassis in the aero carbon road bikes category with a race-ready wireless electronic drivetrain equipped with an integrated power meter as standard. Born from the engineering partnership between BMC Impec Lab and Red Bull Advanced Technologies, it shares the exact same 01 Premium Carbon monocoque frameset and one-piece ICS Carbon Aero cockpit as BMC's WorldTour team machines. Stepping up from the BMC Teammachine R 01 Five, this build delivers a major triple upgrade: a 12-speed SRAM Force eTap AXS groupset with a Spider Power Meter, lighter 50 mm CRD-501 SL Carbon wheels, and a carbon-railed Fizik Vento Argo R1 saddle. At Novo Cicli, our in-house technical department prepares every bike prior to dispatch, tailoring crank length, integrated cockpit sizing, and cassette ratios to your exact riding profile.

Formula 1 CFD Aerodynamics: 01 Premium Carbon Frame, Halo Fork & Mariana Bottom Bracket

Every tube profile of the BMC Teammachine R 01 Three was shaped using Red Bull Advanced Technologies computational fluid dynamics (CFD) to stabilize crosswind handling and maximize torsional stiffness:

• Wide-Stance Halo Fork: The expanded spacing between the 01 Premium Carbon fork legs vents turbulent air shed by the spinning front wheel away from the downtube, dramatically cutting aerodynamic drag at racing speeds.
  
  
• Mariana Bottom Bracket Fairing and AeroCore Bottle Cages: The ultra-deep PF86 bottom bracket shell maximizes the volume allowed by UCI regulations to smooth airflow ahead of the rear wheel, working in tandem with the two integrated AeroCore carbon bottle cages recessed into the frame.
  
  
• One-Piece ICS Carbon Aero Cockpit and 30 mm Tire Clearance: The monocoque carbon bar-stem routes all hydraulic hoses invisibly through the ICS headset, while the Stealth Dropout rear triangle and All-Aero carbon seatpost accommodate tires up to 30 mm actual measured width.

SRAM Force eTap AXS 12s with Integrated Power Meter, CRD-501 SL Wheels & Carbon Saddle

Out of the box, the BMC Teammachine R 01 Three is spec'd for pure racing, combining dual-leg power telemetry with low-inertia carbon rolling stock:

• Wireless SRAM Force eTap AXS (2x12) Groupset with Power Meter: The fully wireless electronic drivetrain integrates a Quarq Power Meter directly into the 48/35T X-Range crankset for pro-grade watt measurement. Paired with a tight XG-1270 10-28T cassette on an XDR freehub body, the 48x10 top gear out-gears a traditional 53x11 with single-tooth jumps across the high-speed cogs, controlled by SRAM Force AXS hydraulic brakes with 160/160 mm Centerline XR rotors.
  
  
• 50 mm CRD-501 SL Carbon Wheelset and Pirelli P Zero Race SL TLR Tires: Upgraded CRD-501 SL (Super Light) 50 mm deep Tubeless Ready carbon rims reduce rotational weight on climbs while holding speed on the flats, shod with 26 mm Pirelli P Zero Race SL TLR tires.
  
  
• Carbon-Railed Fizik Vento Argo R1 Saddle: Contact points are topped off with a short-nose 140 mm Fizik Vento Argo R1 saddle featuring braided carbon rails for stable, forward-rotated pelvic support.

The Novo Cicli Advantage: Climbing Cassette Swap (10-33 / 10-36T), ICS Cockpit Sizing & Custom Setup

From the factory, the BMC Teammachine R 01 Three ships with a pure criterium/flat-race 10-28T cassette and stock size-linked cockpit and crank dimensions. In our technical department, we tailor the bike on the workstand before shipping:

• SRAM AXS Cassette Customization for Mountain Stages: If your riding includes steep Alpine passes or high-mountain Granfondos, upon request we swap the stock 10-28T cassette for a wider SRAM Force 10-33T or 10-36T cassette for effortless climbing cadence.
  
  
• ICS Carbon Aero Cockpit, Power Meter Crank Length & Tubeless Setup: We can customize the Power Meter crank arm length (e.g., 165 mm, 170 mm, or 172.5 mm), adjust the one-piece ICS Carbon Aero bar-stem dimensions to your bike fit sheet, and perform a full tubeless conversion on the CRD-501 SL wheels prior to collection in Besnate (Varese, Italy) or insured international delivery.

BMC Teammachine R 01 Three Technical Specifications

• Available Sizes: 47, 51, 54, 56, 58, 61
  
  
• Frame: BMC Teammachine R 01 Premium Carbon with AeroCore Design, co-developed with Red Bull Advanced Technologies, ICS Stealth internal cable routing, Mariana Press-Fit PF86 bottom bracket, Stealth Dropout design, Flat Mount disc, 12x142 mm thru-axle
  
  
• Fork: BMC Teammachine R 01 Halo Full Carbon 01 Premium, ICS technology with Stealth routing, Stealth Dropout design, Flat Mount disc, 12x100 mm thru-axle
  
  
• Integrated Handlebar: BMC ICS Carbon Aero, One-Piece Full Carbon monocoque cockpit with internal ICS routing
  
  
• Seatpost: BMC Teammachine R 01 Premium Carbon All-Aero (0 mm Offset on sizes 47–51 | 10 mm Offset on sizes 54–61)
  
  
• Shifters and Brake Levers: SRAM Force eTap AXS wireless 2x12-speed
  
  
• Rear Derailleur: SRAM Force eTap AXS wireless electronic 12-speed
  
  
• Front Derailleur: SRAM Force eTap AXS wireless electronic braze-on
  
  
• Crankset and Power Meter: SRAM Force AXS 12-speed with integrated Power Meter, 48/35T X-Range chainrings
  
  
• Cassette: SRAM Force XG-1270 12-speed, 10-28T range (XDR freehub)
  
  
• Chain: SRAM Force Flattop 12-speed
  
  
• Brakes and Rotors: SRAM Force eTap AXS Flat Mount hydraulic disc calipers with Centerlock SRAM Centerline XR 160 mm front and 160 mm rear rotors
  
  
• Wheels: CRD-501 SL Carbon, 50 mm deep Super Light Full Carbon Tubeless Ready rim profile
  
  
• Tires: Pirelli P Zero Race SL TLR, 26 mm (maximum frame and fork tire clearance up to 30 mm measured width)
  
  
• Saddle: Fizik Vento Argo R1 with carbon rails, 140 mm width
  
  
• Included Accessories & Limits: Integrated BMC Teammachine R AeroCore carbon bottle cages included | ASTM Level 1 certified | 110 kg system weight limit

Shipping and Delivery – Novo Cicli

At Novo Cicli, we take the utmost care in preparing and packaging every single item. We want to ensure that components, accessories and bicycles arrive at their destination in perfect condition and as quickly as possible.

Below you’ll find detailed information about shipping times, costs and methods.

🇮🇹 Shipping within Italy

Components and Accessories

• 
  Processing time: Orders are prepared and handed over to the courier within 24–72 business hours (1–3 days) of receiving payment.
• 
  Delivery time (transit): Usually 1–3 business days, depending on the destination (islands and remote areas may take slightly longer).
• 
  Shipping costs:Free for orders of €90.00 or more €4.90 flat rate for orders under €90.00

🇪🇺 Shipping within Europe

Components and Accessories

• 
  Processing time: Orders are handed over to the courier within 1–6 business days of payment confirmation.
• 
  Delivery time (transit): 4–9 business days, depending on the destination country.
• 
  Shipping costs:Standard rate: €34.90Note: Final costs and delivery times may vary depending on the destination country, the service selected and the parcel’s total weight/volume.

Bicycle Shipping (Italy and Europe)

Shipping a bicycle requires meticulous care and high safety standards to ensure your bike arrives intact, protected and ready to ride anywhere in the world.

Bicycle shipping rates

• 
  Italy: €50.00
  
• 
  Rest of Europe: €169.00
  

Preparation, Quality Control and Special Packaging

• 
  Workshop inspection and assembly: Each bicycle undergoes a thorough preliminary inspection by our qualified mechanics (safety checks, gear adjustment, brakes and components). Setup and testing take approximately 1–2 business days before shipping.
• 
  Custom packaging and integrated cockpits: For models featuring integrated handlebars or specific technical configurations, we use custom boxes and protective materials. This helps protect the internal cable routing and handlebar alignment, minimizing the assembly required from the customer once the bike arrives.
• 
  Continuous improvement: We refine our packaging techniques and materials year after year, drawing on our hands-on experience to ensure every bicycle is shipped and delivered in the best possible condition.
• 
  Standard shipping: In other cases, the bike is shipped in the manufacturer’s original box, always after a general inspection and reinforcement of critical areas.
• 
  Custom modifications: Would you like components, wheels or accessories changed before shipping? Custom modifications are always available: timelines and any additional costs will be agreed with us in advance.

📍 Free In-Store Pickup (Click & Collect)

If you’d prefer to collect your purchase in person (with no shipping charges), you can select the in-store pickup option at checkout:

• 
  Store:Novo CicliVia Genolini, 1B – Besnate (VA)
• 
  Ready-for-pickup notification: You’ll receive an email notification as soon as your order is ready and has been prepared in the workshop for handover.

📦 Order Tracking

As soon as your shipment is handed over to the courier, you’ll receive an automated email with the tracking code (tracking link) so you can monitor delivery status in real time.

For any questions or information, message us directly on WhatsApp by clicking HERE, or send us an email at info@novocicli.com.