BMC Teammachine SLR 01 Frameset Gen 5

6 products

BMC Teammachine SLR 01 Frameset Gen 5: Climbing Road Module

The BMC Teammachine SLR 01 Frameset collection brings together all colorways of the fifth generation (SLR 01 Gen 5) of the Swiss brand's flagship climbing frame, including both the initial release of the Gen 5 platform and the latest production revision updated with the UDH standard. Developed through CFD fluid dynamics software and wind tunnel testing to bring its aerodynamic efficiency close to the Teammachine R 01 while preserving featherweight construction, the complete module weighs 1,575 grams in size 54 (including frame, fork, seatpost, carbon Aerocore bottle cages, and hardware). At Novo Cicli, this frameset serves as the technical foundation to create a bespoke Custom Build in our workshop tailored to your biomechanical measurements.

SLR 01 Gen 5 Engineering: 01 Premium Carbon, Size Specific Geometry and Dropout Versions

Every structural detail of the Teammachine SLR 01 Gen 5 platform in 01 Premium Carbon with TCC Race Compliance layup is engineered to maximize power transfer at the 86.5 mm PressFit bottom bracket shell and descending precision:

Size Specific Fork and Seatpost Offset: To maintain consistent trail and handling responsiveness across every rider height, BMC employs two dedicated geometries. Sizes 47 and 51 feature a 48 mm fork offset paired with a 0 mm offset seatpost; sizes 54, 56, 58, and 61 transition to a 43 mm fork offset with a 10 mm setback seatpost.
Controlled Airflow, Aerocore and 32 mm Tire Clearance: The downtube and seat tube sections integrate superlight carbon Aerocore bottle cages (included in the module), while frame and fork clearance accommodates tubeless tires up to 32 mm measured width.
First Version Gen 5 and Latest Full Mount UDH Version: Within this collection, both rear triangle revisions of the Gen 5 platform are available. The first version of the Gen 5 lacks a UDH hanger and is designed for standard road electronic groupsets using a traditional or Direct Mount hanger; the latest version of the Gen 5 introduces the universal Full Mount UDH interface (supplied as standard with both a SRAM UDH hanger and a Shimano Direct Mount hanger, alongside a removable 2x front derailleur mount and a flush cover plate for 1x single chainring setups).

The Workshop Advantage: Free ICS Cockpit Selection and Custom Builds

The BMC Teammachine SLR 01 Frameset module ships with the frame, fork, aero shaped carbon seatpost, and ICS headset kit (high and low top cones with three 10 mm spacers and two 3 mm spacers), leaving handlebar selection open. At Novo Cicli (official BMC dealer), we use this architecture to assemble your bike to measure with zero wasted factory parts:

ICS Cockpit Pairing to Your Exact Fit: Because you are not locked into a pre packaged handlebar size in the box, you can work with our mechanics to select the one piece ICS Carbon Evo cockpit, the ICS Carbon Aero bar, or the integrated BMC RSM 01 / ICS2 stem directly in the exact handlebar width and stem length required by your fit.
Electronic Drivetrain and Custom Crank Lengths: We assemble the frame with wireless Shimano Dura Ace Di2, Ultegra Di2, or SRAM RED AXS E1 and Force AXS groupsets, selecting crank arm lengths (165 mm, 170 mm, 172.5 mm, or 175 mm), climbing chainring and cassette ratios, brake rotors (160 mm front and 140 mm or 160 mm rear), power meters, and CeramicSpeed bearings.
Carbon Wheelsets and Actual Workbench Weight: We complete the project with climbing or mid depth carbon wheelsets (CADEX, DT Swiss, ENVE, or Zipp), tubeless tires up to 32 mm, and a dedicated saddle, certifying the final scale weight on our workbench prior to pickup in Besnate (Varese) or insured international shipping.

Explore all available colorways in the BMC Teammachine SLR 01 Frameset collection at Novo Cicli and contact us to verify the exact specifications of each colorway and configure a quote for your custom build.